Setting up Virtual Private Network (VPN) connections to your office is becoming more common as work from home jobs expand. Typically the IT guy at your work should be able to provide you the necessary information needed to connect to your office securely such as IP address to connect to, username, password, and possibly domain. Once you make the VPN connection it will be as if you are working on a computer at the office so you can use things at the office such as network printers, file servers, etc.
If you have one of the larger builds of dd-wrt then you probably have PPTP support built into the firmware. This will allow you to move VPN connections to the router instead of having to connect from each desktop which will securely make the remote network seem like part of the local network.
Connecting your iPhone to the office VPN is easy to configure and will allow you to be productive outside the office with ease. Using the PPTP VPN service on your iPhone will allow you to perform tasks as if you were sitting at your desk in the office. In the below scenario we explain configuring a PPTP (Point-to-Point Tunneling Protocol) VPN connection from your iPhone to a Cisco RV016 that is already configured to accept PPTP connections located in your office. The VPN (Virtual Private Network) configuration allows you to enable and disable the connection with ease as you will want it disabled if you are not using the connection to sa ve on bandwidth.
A company I work for has a VPN connection at the office and from time to time I need to pull firmware, software, or various documents from them. Other times there are a couple Linux servers on the local network that I need to work on so I can either SSH from the outside or create a VPN connection and hit the devices through the local network. The amount of data I am pulling from the local network has become more frequent so I needed to find a way to not have to create a VPN connection from my laptop so often and was thinking that it would probably just be easier to connect my Linksys WRT600N router running dd-wrt firmware to the office VPN server. This way I would always have a connection to the office without having to interrupt work and create a PPTP VPN connection.