If you are new to WinDbg (The Windows Debugger) like I am then you might struggle with some of the initial configuration items. I would suggest you do your best to get through the initial configuration issues so you can troubleshoot your Crash Dump files to analyze the issues on your computer. So far I am really happy with Windows 7 Ultimate 64-Bit though I have had multiple BSOD’s (Blue Screens of Death) which are frustrating. I am now doing what I can to get down to the bottom of each of the crashes so I can do whatever it takes to minimize any crashes and continue using Windows 7. Follow the directions below to configure the path to Symbols needed by the Windows Debugger (WinDbg).
I typically transfer images from my iPhone to my Windows XP computer by clicking on My Computer, clicking on the Apple iPhone icon, and then transferring the images to another folder on the computer. Today I plugged in the iPhone via USB to my Windows XP laptop and I was surprised to see that the iPhone Camera was not showing as a drive after clicking on My Computer. To verify I hadn’t made a configuration change on accident that was causing this to not show up I verified that the computer was not seeing the iPhone’s camera by opening up Control Panel and clicking on Scanners and Cameras.
**UPDATE: The first solution is what worked for me but there have been some comments confirming that the below will not solve everyones issue. Another solution to try is to delete any images you have saved to the Camera Roll from email. It appears in some situations if images are saved from emails that it is causing issues with the digital camera driver and you will be unable to retrieve images from the iPhone if you have saved images you received via email. I attempted to duplicate the issue with emailed gif’s and emailed jpg’s but I was unable to though I am sure this issue exists for others as it has already been confirmed at least twice in the comments below.
If you have recently removed the Cisco Systems VPN client from your Windows XP computer you may notice that it does not always uninstall the network adapter connection it created during install. When viewing your Network Connections you will notice there is still a Cisco Systems VPN Adapter connection that looks similar to the typical Ethernet adapter on your computer. You would think that the ability to remove this item should be as simple as right clicking the adapter in question and selecting Delete from the drop down however this is not the case. Don’t worry removing it is easy but you must do it from the Device Manager instead of the Network Connections interface.