There are many reasons that you may want to set a static IP on your Xbox 360 but the biggest reason would probably be the fact that you are having trouble playing online multiplayer games. I will be writing another article soon about how to resolve the issue of NAT showing as Moderate on your Xbox 360. This article is specifically related to assigning a static IP on your home network to your Xbox 360. Once you complete the below steps you will always know the address of your Xbox 360 on your local network which will make things such as port forwarding easier in the future. Follow the steps below to assign a static IP address to your Xbox 360.
The easiest way to configure a static IP on the HP Photosmart C5100 is via the web interface. You probably do not know to the IP address of the all-in-one printer since you are just now configuring the static IP and if it is currently on the netork then it has received a dynamic IP address via DHCP (Dynamic Host Configuration Protocol). Regardless its an easy process which I will explain step by step below.
- Locate IP Address: First we will need to locate the current Internet Protocol address of the printer. Look in the properties of the printer and look at the Ports tab to see if there is an IP address specified. If there is not then you can print a test page, bring up a command prompt, and type “arp -a”. You should notice a couple different IP addresses of which one should be associated with a Physical Address that begins with 00:19:BB which is Hewlett Packard. Once you have located the IP address take note. It should be an address where the first three octets begin with 192.168.0.