The default logins are noted in the pfSense documentation as well as numerous locations on the pfSense website however I am noting here for our own benefit. We try to remember so many default logins that we sometimes forget the easiest ones including the fact that pfSense uses a different username as default for SSH and for the pfSense admin GUI. So to make it easiest to find I have noted them below.
When attempting to start the Adaptec Storage Manager you might receive an error complaining about the Xlib connection being refused by the server. If you are attempting to launch the Adaptec Storage Manager as root this is likely related to X11 security and the fact that you cannot connect to X as root. Below is the error output followed by the solution to resolve.
Locating the Ubuntu version is easy regardless of if you need to locate the Ubuntu Linux version from the CLI or via the Ubuntu GUI. I always forget what the CLI command is so this is as much reference for myself as it is sharing with others. Below I describe how to determine Ubuntu version from the Ubuntu Linux CLI and the Ubuntu Linux GUI.
OK this article is sort of silly and will be fairly short and to the point but earlier I was trying to find the process name of the OSX Lion firewall. During the process of looking for the OSX Lion firewall process name I learned a bunch of little firewall tidbits such as there are a ton of settings you can set from the command line, there are third party OSX Lion Firewall GUI configuration tools, and there are complete third party firewalls available for install on OSX Lion.
The below article is the first in a series of articles to help get you more familiar with the BigIP BigPipe commands used to manage an LTM VE or Local Traffic Manager Virtual Edition installed in VMWare Player as noted in this article. After following the steps in this article you will have created two VLAN’s (Virtual Local Area Networks) and added an IP address to each VLAN which will be the foundation of the series of articles that will help you setup and configure your LTM VE to do basic load balancing followed by other articles that build on that foundation. The future articles will become more in depth by first taking you through basic troubleshooting steps using and overtime using more advanced techniques for troubleshooting issues on a BigIP Local Traffic Manager.