I have been asked the question numerous times of what PTS and TTY mean in Linux regarding terminals. People ask because they may be newer to Linux and learning how to view a process list they may actually see a serial connection, SSH connection, or a telnet connection in the process list that might show something like pts/0, pts/2, tty1, or tty2 in the TTY column. Most processes will just have a question mark in this column but if something is connected to an actual terminal then it will list where it is connected in the TTY column of “ps”.Details
When connecting to a Linux device using a serial port there may be times where that connection becomes stuck open and thus will not provide sane output to the TTY port. This issue can be resolved by killing the PID (Process ID) and letting the serial port process restart.
The serial port connection should be configured in inittab which will allow you to specify various configuration options as well as respawning the process. So when you specify respawn the process will automatically restart if it is no longer running as will be the case if you kill the process off. The inittab entry will look similar to one of the two below examples.Details
After upgrading my iPhone to firmware version 3.1 my Visual Voicemail stopped working. Initially I wasn’t sure what the issue was but I was not receiving voicemail via the iPhone. I did finally find out that I could retrieve the voicemail by holding the 1 key which will then dial voicemail and let you retrieve your voicemail. If you are able to retrieve your voicemail by holding the 1 key but the voicemails are not showing up in the iPhone voicemail interface then there is an issue with what ATT calls Visual Voicemail.Details
We wrote an article recently about restoring your iPhone to the original settings by restoring the firmware on the iPhone and then backing up your settings. Sometimes simply resetting the iPhone settings will resolve conflicts or functionality you may have lost because of a setting that was changed. There may also be cases where you need to reset the iPhone network settings which can be completed from the same location. Follow the directions below to factory default the settings on your iPhone or to factory default the network settings only.Details