Awhile back I accidentally assigned a Speed Dial key to the number 1 on my BlackBerry 8320 Curve cell phone. The problem with this is that the 1 key is reserved for Voicemail. When VM is dialed with that speed dial key then the Voicemail Settings are used so if you have password protected your voicemail, as noted here, then you can have the password automatically entered when dialing VM by using the 1 Speed Dial key.
Mounting a NTFS hard drive in CentOS Linux is fairly easy. In my case the drive was damaged and wouldn’t mount properly in Windows however I was able to put it into a USB hard drive enclosure and mount it under CentOS to recover the data. If you are mounting the drive via a external USB enclosure this article may help.
Follow the directions below to mount a NTFS drive in CentOS Linux.
Recently I had a hard drive crash that was in a Windows XP laptop. The drive would not mount under Windows however I was able to eventually mount it under Linux and rescue some of the data. In this article I will describe how to verify the USB hard drive enclosure is seen on a CentOS Linux computer and verify that Linux is able to see the USB device and the drive.
First you will want to remove the hard drive from your Windows XP computer and physically mount it into the USB hard drive enclosure. This will involve connecting it inside (IDE or SATA) and then plugging the USB cable or cables into the CentOS server. Since the hard drive is damaged its hard to know if its not reading it or if you have something misconfigured, a loose cable, etc. Below are a couple tips to make sure that the hard drive is being recognized via the USB connection.
A client of mine that still uses Outlook Express called me because they were unable to receive mail on one of their PC’s. After a little troubleshooting I determined that there was nothing wrong with the account itself but it appeared the issue was on the computer. The specific error they were receiving is below.
Error:An unkown error has occurred. Account: ‘mail.example.com’, Server: ‘mail.example’, Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800C0133
I personally like my folders to display contents the same across all folders on the PC. Windows Vista by default displays folder contents with large icons but to me it seems much easier to navigate if you use the folder view where it displays small icons with details about each item. Below are instructions on how to modify the folder view options and then apply that view to all the folders on your computer.
The default folder view will look something similar to the below.