Posts Tagged “secondary”

A client of mine had a Cisco 2811 installed before I started working for them so I had to go over the configuration to become familiar with things. One of the Cisco IOS configuration items used was translation-rule which will allow 10 to 15 Rules to be created under each translation-rule. In this scenario they were using translation-rule to forward external DID’s from their telco provider┬áto internal extensions. This works fine except for the fact that if you have more than 10 (in this case) external numbers you won’t be able to continue to forward them to internal extensions without complicating the configuration using multiple dial plans, etc. The easiest way to get away from the translation-rule being used in this way is to assign t he external DID telephone numbers as secondary numbers under each extension configuration as explained below.

Read the rest of this entry »

DeliciousStumbleUponDiggTwitterFacebookRedditLinkedInEmail
Tags: , , , , , , , , , , , , , , , , ,

Comments No Comments »

First off you can add multiple IP’s to each SliceHost VPS. Adding the secondary IP address to a SliceHost Virtual Private Server (VPS) is easy. Open the SliceManager control panel and click the Help tab to open a support ticket. In the ticket state that you want a secondary IP, the justification for it, and that you understand it will cost $2/month. Typically support responds very quickly and will configure the secondary IP address for you.

Typical justification would be that you are running a web server and need to have multiple SSL certificates.

Read the rest of this entry »

DeliciousStumbleUponDiggTwitterFacebookRedditLinkedInEmail
Tags: , , , , , , , , , ,

Comments 1 Comment »