While rebuilding a large RAID 5 logical drive I had to use parted instead of fdisk. It has been awhile since I had to build a logical drive that was over 2TB so it had been quite awhile since I have used parted which will perform the same basic functions as fdisk and more. Anyhow when first attempting to use parted to create a partition table on the logical volume sitting on top of an Adaptec RAID card with multiple 2TB drives configured as RAID 5 on CentOS Linux I ran into an error. The resolution is easy but needed to note for myself as much as anything else./dev/sdc, adaptec, CentOS, fdisk, format, Linux, logical drive, mklabel, mkpart, parted, partition, print, raid, raid 5, tb, terabyte
Posts Tagged “fdisk”
Jun 11 2012
Jun 24 2009
Recently I had a hard drive crash that was in a Windows XP laptop. The drive would not mount under Windows however I was able to eventually mount it under Linux and rescue some of the data. In this article I will describe how to verify the USB hard drive enclosure is seen on a CentOS Linux computer and verify that Linux is able to see the USB device and the drive.
First you will want to remove the hard drive from your Windows XP computer and physically mount it into the USB hard drive enclosure. This will involve connecting it inside (IDE or SATA) and then plugging the USB cable or cables into the CentOS server. Since the hard drive is damaged its hard to know if its not reading it or if you have something misconfigured, a loose cable, etc. Below are a couple tips to make sure that the hard drive is being recognized via the USB connection.1.8, 2.5, 3.5", CentOS, dead device, dmesg, enclosure, fdisk, grep, hard drive, I/O, IDE, Linux, mass storage device, mount, partition, PATA, sata, USB, windows, xp