Archive for November 15th, 2008

The easiest way to configure a static IP on the HP Photosmart C5100 is via the web interface. You probably do not know to the IP address of the all-in-one printer since you are just now configuring the static IP and if it is currently on the netork then it has received a dynamic IP address via DHCP (Dynamic Host Configuration Protocol). Regardless its an easy process which I will explain step by step below.

  1. Locate IP Address: First we will need to locate the current Internet Protocol address of the printer. Look in the properties of the printer and look at the Ports tab to see if there is an IP address specified. If there is not then you can print a test page, bring up a command prompt, and type “arp -a”. You should notice a couple different IP addresses of which one should be associated with a Physical Address that begins with 00:19:BB which is Hewlett Packard. Once you have located the IP address take note. It should be an address where the first three octets begin with 192.168.0.
  2. Read the rest of this entry »

DeliciousStumbleUponDiggTwitterFacebookRedditLinkedInEmail
Tags: , , , , , , , , , , , , ,

Comments No Comments »