Comments on: TFTP: Error code 1: File not found

By: alex

alex — Tue, 04 Oct 2011 08:02:52 +0000

Hello zelazny,

Your English is not bad at all… Thanks for taking the time to further expand on what we have in the article.

Thanks.
alex

By: zelazny

zelazny — Thu, 29 Sep 2011 15:57:15 +0000

first sorry for my english it’s bad. I have same error. and i resolve it by modified my tftp config file in xinet.d directory.
this is my config.
service tftp
{
protocol = udp
port = 69
socket_type = dgram
wait = yes
user = nobody
server = /usr/sbin/in.tftpd
server_args = /var/lib/tftpboot
disable = no
}

before i was using /tftpboot directory but it doesn’t work. so i replace it by /var/lib/tftpboot . IT’S WORKS.

don’t forget to changes permission and owner of tftpboot in /var/lib/tftpboot

By: alex

alex — Wed, 02 Feb 2011 03:53:10 +0000

Hello alan,

Unfortunately you would need to provide a lot more details than that to receive any sort of helpful response. This is also outside the scope of this article.

Thanks.
alex

By: alan

alan — Tue, 01 Feb 2011 23:01:26 +0000

my phone has a fault TFTP FILE NOT FOUND I can do to reset the factory and installing a new file

By: alex

alex — Wed, 26 Jan 2011 19:53:52 +0000

Hello Nihm’ah,

Unfortunately TFTP on the PBX is outside the scope of this article. I have never used one of those PBX’s so I don’t even have any thoughts to provide. Good luck finding a solution.

Thanks.
alex

By: Nihm'ah

Nihm'ah — Wed, 26 Jan 2011 15:22:50 +0000

Hello,

I have a problem trying to update firmware of aastra 57i CT ip-phone on PBX in a flash.
Problem is tftp. service is not working on the pbx

By: alex

alex — Mon, 13 Dec 2010 16:18:12 +0000

Hello PARAS,

Unfortunately it is impossible to help when the only information provided is similar to what you have provided above. If you want real help ask a specific question and note in detail what steps you have already taken.

Thanks.
alex

By: PARAS

PARAS — Mon, 13 Dec 2010 11:05:40 +0000

i use to windows 2003 server in error clint side TFTP 1 notplz help me

thankssss
paras

By: stevemagg

stevemagg — Fri, 20 Aug 2010 16:32:50 +0000

GREAT. totally forgot about this. THX

By: alex

alex — Sat, 27 Feb 2010 18:33:09 +0000

Hello Naseem,

What does working on a state bank network have to do with anything? Without specific details of what the error is, what specific software you are using, etc. I don’t know that we can provide any useful information. What is the specific command you are using? What is the specific error? Any other specific details you can provide will assist with valuable feedback for your problem.

Thanks.
alex

By: Naseem

Naseem — Sat, 27 Feb 2010 08:13:55 +0000

I am working in state bank network…am trying to load ios wia tftp dndld but am geeting an error
tftp error r could not open requested file

i given ios in root directory ..cross over cable used….given the ips correctly
can any one help me

By: alex

alex — Mon, 28 Sep 2009 21:13:34 +0000

Hello nik,

Thanks for the info relating to Solaris.

Thanks.
Alex

By: nik

nik — Fri, 25 Sep 2009 07:10:05 +0000

on solaris if you want to write to a file you need 2 conditions to be met:

a) file already exists
b) file is world writeable (ie. chmod 777 it)

By: krishna

krishna — Tue, 07 Jul 2009 22:49:32 +0000

Hi alex,

i installed fog(fogproject.org) software on fedora 10 machine and which is a cloning software, and i had setup this fedora 10 machine as tftp server and i am PXE booting the client(windows) to load its image to tftp server. here windows 2003 server is serving the dhcp service to the client and i had configured the tftp server ipaddress and bootfile name(pxelinux.0) on dhcp scope. i am getting an error while booting the client as TFTP ERROR: FILE NOT FOUND
MY /tftpboot directory has pxelinux.0 file with 777 permission.

By: alex

alex — Tue, 07 Jul 2009 20:47:51 +0000

Can you post your TFTP server configuration? Is TFTP serving files from /tftpboot? What was the file permissions and path of the file you are trying to pull? Is the client you are pulling the file from a Linux machine or Windows? Again the more complete you can be the easier this is going to be to help with. Currently you are giving little bits with each post. Post other things like the command you are using in an attempt to connect to the “client” computer. Post any logged error messages. If you port scan the “client” do you see it listening on the proper TFTP port?

By: krishna

krishna — Tue, 07 Jul 2009 19:16:07 +0000

Hi alex,

I had setup tftp server on fedora 10 machine, which needs to pull image from a client, which has its address on dhcp service provided by windows server 2003.

By: alex

alex — Tue, 07 Jul 2009 17:25:08 +0000

hello krishana,

You are going to need to provide more details. What do you mean your DHCP is on Windows Server 2003? What specifically are you trying to do? Are you attempting to push a file to the TFTP server? Pull a file from the TFTP server? What you are saying above doesn’t provide near enough information to assist with.

By: krishna

krishna — Tue, 07 Jul 2009 16:20:45 +0000

Hi Nick,

i am getting tftp error: file not found while booting the client my dhcp is on windows server 2003 and tftp server is on fedora 10.
pls help me..

krishna

By: krishna

krishna — Tue, 07 Jul 2009 16:19:53 +0000

Hi alex,

i am getting tftp error: file not found while booting the client my dhcp is on windows server 2003 and tftp server is on fedora 10.
pls help me..

krishna

By: alex

alex — Mon, 06 Jul 2009 15:53:42 +0000

Hello Nick,

Great addition. Thanks for adding.